MANUAL CALL POINT Third
Addressable Single Action and Dual Action Pull Stations
The TR-PULL-SA is a single action pull station requiring only one motion to activate the station. The TR-PULL-DA is a dual action pull station requiring two motions to active the station. Both pull stations are designed to work with Triga series fire alarm control panels (FACPs).
INSTALLATION
The TR-PULL-SA and TR-PULL-DA can be surface mounted to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13”(5.40 cm) or double gang or 4” (10.61 cm) square electrical box. You can also use the optional trim ring if the station is being semi-flush mounted.
COMPATIBILITY
The TR-PULL-SA and TR-PULL-DA are compatible with the following Triga Series FACPs:
• TR-2100R / TR-2100B
• TR-2100ECSR / TR-2100ECSB
• TR-R2100R / TR-R2100B
· Installer can open station without causing an alarm condition
· Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
· Key operated test and reset lock using lock plate actuator
· Key matches compatible FACP locks
· Meets ADA requirement for 5 lbs maximum pull force to active
· Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13])
· Shell, door, and handle molded from durable LEXAN ®
· Reliable analog communications for trouble-free operation
· Braille text on station handle
· Rotary address switches for fast installation
· Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
· UL Listed, including UL 38, Standard of Manually Actuated Signaling System
