HORN WITH STROBE Second
Multi-Candela TrueAlert A/Vs with horn and synchronized strobe provide convenient installation to standard electrical boxes. The enclosure designs are both impact and vandal resistant and provide a convenient strobe intensity selection. Since each model can be selected for strobe intensity output, on-site model inventory is minimized and changes encountered during construction can be easily accommodated.
Wall mount A/V housings are a one-piece assembly (including lens) that mounts to a single or double gang, or 4” square standard electrical box. The cover can be quickly removed (a tool is required) and covers are available separately for color conversion.
Ceiling mount A/Vs install using standard 4” electrical boxes. Color choice is determined by model number.
Strobe Intensity Selection
During installation, a selection plug at the back of the housing determines the desired strobe intensity. An attached flag with black letters on a highly visible yellow background allows the selected intensity to be seen at the side of the strobe lens.
Strobe Intensity Selection
During installation, a selection plug at the back of the housing determines the desired strobe intensity. An attached flag with black letters on a highly visible yellow background allows the selected intensity to be seen at the side of the strobe lens.
Audible/visible (A/V) notification appliances with efficient electronic horn and high output xenon strobe, available for wall or ceiling mount
· Operation is compatible with ADA requirements (refer to important installation information on page 3)
· Rugged, high impact, flame retardant thermoplastic housings are available in red or white with clear lens
Operates over a two-wire SmartSync circuit to provide:
· Horns that are controlled separately from strobes on the same two-wire circuit
· “On-until-silenced” and “on-until-reset” operation on the same two-wire pair
· SmartSync horn activation of Temporal pattern, March Time pattern (at 60 BPM), or on continuously
· Strobe appliances on the same circuit operating at a synchronized 1 Hz flash rate
· Class B operation requires connection to a compatible SmartSync NAC or to SmartSync Control Module (SCM) 4905-9938
· Class A operation when connected to the 4905-9938 SCM or with 4100U series fire alarm control panel NACs
